Laser
Cut 10 Gage Steel Plate and Formed to Shape for Accuracy and Strength.
160 STEEL BALL BEARINGS for NO
Vibration and LIFETIME Wear. NOT
The European Construction with PLASTIC SKID PLATES that
Wear Out.
3/8 X 2 inches Machined Center with Center Passage of 1.5 inches for Wire Loom and Plugs.
Adjustable sprinter swivel tension
Tested to
Comply with DOT FMVSS
207 Safety Standards per
sections S4.2, S4.3.
Easy Installation with
Instructions.
Manufactured and sold with USA Pricing.
Over 55 Years In Seat Manufacturing With Installation Assistance
Your Factory Direct Source for chevy-gmc seat swivels . ALL Swivel Costs Entered Are to Manufacture the Best Product . NO Middle Man Profits . No Import Duties . No Ocean Freight . 100 Percent Made in the USA
SUPERIOR
NEW
DESIGN
Manufactured Specifically for the 1996-2023 Chevy Van
With Mount Holes Specific ONLY for Chevy Express
and GMC Savana Vans
NOT Multiple Side Holes
that TAKE AWAY the integrity.
IN STOCK
FACTORY SEAT on Factory Base
Large Wire Pass-Thru Center
Offset Design Allows Swivel Without Opening Door.
Top bolt pattern
14 1/4 x 13 1/4"
Bottom bolt pattern
14 1/4 x 13 1/4"
Seat raise 1.5"
Seat offset 1" when
facing forward. 3" facing to the rear.
Approved for seats without air bags.
SUPERIOR
NEW
DESIGN
Manufactured Specifically for the 1996-2023 Chevy Van
With Mount Holes Specific ONLY for Chevy Express
and GMC Savana Vans
NOT Multiple Side Holes
that TAKE AWAY the integrity.
IN STOCK
OUR SEAT on Factory Base
2
Offset Design Allows Swivel Without Opening Door and the Option of an Outside Arm
Large Wire Pass-Thru Center
Top bolt pattern 14x11"
Bottom bolt pattern
14 1/4 x 13 1/4"
Seat raise 1.5"
Seat offset 1" when
facing forward. 3" facing to the rear.
Approved for seats without air bags.
SEAT SLIDE TRACKS
OUR Seat Slide Set
After markets seating
11" track length
7" travel
Laser
Cut 10 Gage Steel Plate and Formed to Shape for Accuracy and Strength.
160 Steel
Ball Bearing Trace for NO
Vibration and LIFETIME Wear. Not
The European Construction with a Few Nylon Glides or Rollers that
Wear Out.
3/8" X 2" Machined Center with Center Passage of 1.5" for Wire Loom and Plugs.
Available
for Factory and After Market
Seating.
Tested to
Comply with DOT FMVSS
207 Safety Standards per
sections S4.2, S4.3.