- Laser
Cut 10 Gage Steel Plate and Formed to Shape for Accuracy and Strength.
- 160 STEEL BALL BEARINGS for NO
Vibration and LIFETIME Wear. NOT
The European Construction with PLASTIC SKID PLATES that
Wear Out.
- 3/8 X 2 inches Machined Center with Center Passage of 1.5 inches for Wire Loom and Plugs.
- Adjustable sprinter swivel tension
- Tested to
Comply with DOT FMVSS
207 Safety Standards per
sections S4.2, S4.3.
- Easy Installation with
Instructions.
- Manufactured and sold with USA Pricing.
|
 |
|
|
Your Factory Direct Source for Mercedes sprinter seat swivels
.
ALL Swivel Costs Entered Are to Manufacture the Best Product
.
NO Middle Man Profits
.
No Import Duties
.
No Ocean Freight
.
100 Percent Made in the USA
|
|
|
SUPERIOR
NEW
DESIGN |
Manufactured Specifically for the
2007-2021 SPRINTER
With Mount Holes Specific ONLY for Sprinter
NOT Multiple Side Holes
that TAKE AWAY the integrity. |
|
FACTORY SEAT on Factory Base |
|
- 1.5 Inch Wire Pass-Thru Center
- Top bolt pattern
16 5/8" X 16 5/8"
- Bottom bolt pattern
16 5/8" X 16 5/8"
- Seat raise 1.5"
- Seat offset 1"
- Approved for seats without air bags.
- Made to US DOT Standards in the US Base Design.
- Seat bases tested to meet FMVSS #207 safety standards per sections S4.2 and S4.3
- Easy Bolt in Installation.
|
|
|
|
|
|
|
SUPERIOR
NEW
DESIGN |
Manufactured Specifically for the
2007-2021 SPRINTER
With Mount Holes Specific ONLY for Sprinter
NOT Multiple Side Holes
that TAKE AWAY the integrity. |
|
|
2
- Allows the addition of outside arm.
- 1.5 Inch Wire Pass-Thru Center
- Top bolt pattern
14 x 11"
- Bottom bolt pattern
16 5/8" X 16 5/8"
- Seat raise 1.5"
- Seat offset 1"
- Approved for seats without air bags.
- Made to US DOT Standards in the US Base Design.
- Seat bases tested to meet FMVSS #207 safety standards per sections S4.2 and S4.3
- Easy Bolt in Installation.
|
|
|
|
|
|
|
SUPERIOR
NEW
DESIGN |
Manufactured Specifically for the
2002-2006 SPRINTER
With Mount Holes Specific ONLY for Sprinter
NOT Multiple Side Holes
that TAKE AWAY the integrity. |
|
FACTORY SEAT on Factory Base |
|
2
- 1.5 Inch Wire Pass-Thru Center
- Top bolt pattern
14 7/8 x 16 3/8"
- Bottom bolt pattern
14 7/8 x
16 3/8"
- Seat raise 1.5".
- Approved for seats without air bags.
- Made to US DOT Standards in the US Base Design.
- Seat bases tested to meet FMVSS #207 safety standards per sections S4.2 and S4.3
- Easy Bolt in Installation.
|
|
|
|
|
SUPERIOR
NEW
DESIGN |
Manufactured Specifically for the
2002-2006 SPRINTER
With Mount Holes Specific ONLY for Sprinter
NOT Multiple Side Holes
that TAKE AWAY the integrity. |
|
FACTORY SEAT on Factory Base |
|
2
- 1.5 Inch Wire Pass-Thru Center
- Top bolt pattern
14 x 11"
- Bottom bolt pattern
14 7/8 x 16 3/8"
- Seat raise 1.5"
- Seat offset 2" when
facing forward. 3 1/2 " when facing to the rear.
- Approved for seats without air bags.
- Made to US DOT Standards in the US Base Design.
- Seat bases tested to meet FMVSS #207 safety standards per sections S4.2 and S4.3
- Easy Bolt in Installation.
|
|
|
|
|
|
- Laser
Cut 10 Gage Steel Plate and Formed to Shape for Accuracy and Strength.
- 160 Steel
Ball Bearing Trace for NO
Vibration and LIFETIME Wear. Not
The European Construction with a Few Nylon Glides or Rollers that
Wear Out.
- 3/8 X 2 inches Machined Center with Center Passage of 1.5 inches for Wire Loom and Plugs.
- Adjustable mecedes sprinter swivel tension
- Available
for Factory and After Market
Seating.
- Tested to
Comply with DOT FMVSS
207 Safety Standards per
sections S4.2, S4.3.
- Easy Installation with
Instructions.
- Manufactured and sold with USA Pricing.
|
 |
|