Laser
Cut 10 Gage Steel Plate and Formed to Shape for Accuracy and Strength.
160 STEEL BALL BEARINGS for NO
Vibration and LIFETIME Wear. NOT
The European Construction with PLASTIC SKID PLATES that
Wear Out.
3/8 X 2 inches Machined Center with Center Passage of 1.5 inches for Wire Loom and Plugs.
Adjustable sprinter swivel tension
Tested to
Comply with DOT FMVSS
207 Safety Standards per
sections S4.2, S4.3.
Easy Installation with
Instructions.
Manufactured and sold with USA Pricing.
Over 52 Years In Seat Manufacturing With Installation Assistance
Your Factory Direct Source for nissa nv1500, nv2500 nv3500 seat swivels . ALL Swivel Costs Entered Are to Manufacture the Best Product . NO Middle Man Profits . No Import Duties . No Ocean Freight . 100 Percent Made in the USA
SUPERIOR
NEW
DESIGN
Manufactured Specifically for the
Nissan Van
With Mount Holes Specific ONLY for Nissan
NOT Multiple Side Holes
that TAKE AWAY the integrity.
IN STOCK
FACTORY SEAT on Factory Base
Factory seat
on factory base
Large center for
wire passage
Top and bottom bolt pattern
15 x 17"
Seat raise 1.5"
Includes seat belt attachment
Approved for seats
without air bags
Made to US DOT Standards in the US Base Design.
Seat bases tested to meet FMVSS #207 safety standards per sections S4.2 and S4.3
Easy Bolt in Installation.
If plastic skirt on seat is present about 1/2 inch will need to be trimmed from bottom.
SUPERIOR
NEW
DESIGN
Manufactured Specifically for the
Nissan Van
With Mount Holes Specific ONLY for Nissan
NOT Multiple Side Holes
that TAKE AWAY the integrity.
IN STOCK
OUR SEAT on Factory Base
When changing to
Our seat
on factory base
Large center for
wire passage
Top bolt pattern
14 x 11"
Bottom bolt pattern
15 x 17"
Seat raise 1.5"
Includes seat belt attachment
Approved for seats
without air bags
Seat bases tested to meet FMVSS #207 safety standards per sections S4.2 and S4.3
Easy Bolt in Installation.
If plastic skirt on seat is present about 1/2 inch will need to be trimmed from bottom.
Laser
Cut 10 Gage Steel Plate and Formed to Shape for Accuracy and Strength.
160 Steel
Ball Bearing Trace for NO
Vibration and LIFETIME Wear. Not
The European Construction with a Few Nylon Glides or Rollers that
Wear Out.
3/8 X 2 inches Machined Center with Center Passage of 1.5 inches for Wire Loom and Plugs.
Adjustable nissan swivel tension
Available
for Factory and After Market
Seating.
Tested to
Comply with DOT FMVSS
207 Safety Standards per
sections S4.2, S4.3.
