Mercedes-Benz Requires all 2010 and newer nissans add an additional system for rear climate control to maintain their warrantee. Splicing into the existing air conditioning system will void the warranty.
System kits will need to be tailored to your nissan wheel base, installed equipment and chassis.
530 AC KIT
Long 170" Wheel Base
The model 530 was designed for a small commuter, shuttle type vehicle requires just a little extra cooling. Designed to be used as a maximum system.
BTU Cooling
30,000
CFM
550
Amps at 13.5v
21
Dimensions
32W x 15.5D x 8.5H"
Weight
36 lbs
This model 110 Frisking roof or underbody mounted condenser is a way of providing maximum heat transfer during stop and go operations. Featured are three 11" blades,
white aluminum housing and powder coated galvanized mounting brackets.
BTU Cooling
60,000
CFM
42,000
Amps at 13.5V
22.5
Dimensions
41.75W x 6H x 13D"
Weight
33 lbs
This basic kit includes all components need for a complete installation including the above shown evaporator, condenser, compressor,holes and fittings, and electric wiring with relays and switches. Additional equipment and or additions listed at the bottom of the page, may be required depending upon your particular nissan.
560 AC KIT
Long 170" Wheel Base
The model 560 was designed for a small commuter, shuttle type vehicle requires just a little extra cooling. or heating. Designed to be used as a maximum system.
BTU Cooling
30,000
BTU Heating
32, 000
CFM
550
Amps at 13.5v
21
Dimensions
32W x 15.5D x 8.5H"
Weight
36 lbs
This model 110 Frisking roof or underbody mounted condenser is a way of providing maximum heat transfer during stop and go operations. Featured are three 11" blades,
white aluminum housing and powder coated galvanized mounting brackets.
BTU Cooling
60,000
CFM
42,000
Amps at 13.5V
22.5
Dimensions
41.75W x 6H x 13D"
Weight
33 lbs
This basic kit includes all components need for a complete installation including the above shown evaporator, condenser, compressor,holes and fittings, and electric wiring with relays and switches. Additional equipment and or additions listed at the bottom of the page, may be required depending upon your particular nissan.
935 AC KIT
Long 170" Wheel Base
The model 935 is a horizontally mounted large capacity cooling and heating unit that can be mounted in most cabinets. RV's, Specialty Vehicles and ambulances are the primary users.
BTU Cooling
32,000
BTU Heating
35,000
CFM
650
Amps at 13.5v
18
Dimensions
17.5W x 13.25H x 9.25D"
Weight
30 lbs
This model 110 Frisking roof or underbody mounted condenser is a way of providing maximum heat transfer during stop and go operations. Featured are three 11" blades,
white aluminum housing and powder coated galvanized mounting brackets.
BTU Cooling
60,000
CFM
42,000
Amps at 13.5V
22.5
Dimensions
41.75W x 6H x 13D"
Weight
33 lbs
This basic kit includes all components need for a complete installation including the above shown evaporator, condenser, compressor,holes and fittings, and electric wiring with relays and switches. Additional equipment and or additions listed at the bottom of the page, may be required depending upon your particular nissan.
941 AC KIT
Long 170" Wheel Base
The model 941 is a horizontally mounted large capacity cooling and heating unit that can be mounted in most cabinets. RV's and Specialty Vehicles are the primary users.
BTU Cooling
32,000
BTU Heating
35,000
CFM
630
Amps at 13.5v
16.3
Dimensions
17.625W x 9D x 15H"
Weight
29 lbs
This model 110 Frisking roof or underbody mounted condenser is a way of providing maximum heat transfer during stop and go operations. Featured are three 11" blades,
white aluminum housing and powder coated galvanized mounting brackets.
BTU Cooling
60,000
CFM
42,000
Amps at 13.5V
22.5
Dimensions
41.75W x 6H x 13D"
Weight
33 lbs
This basic kit includes all components need for a complete installation including the above shown evaporator, condenser, compressor,holes and fittings, and electric wiring with relays and switches. Additional equipment and or additions listed at the bottom of the page, may be required depending upon your particular nissan.
917 AC KIT
Long 170" Wheel Base
Perfect for ambulances and specialty vehicles. These units are capable of achieving extreme cold temperatures due to the use of modern components and the highest level of development. All units feature a 3-year/36,000 mi. warranty and long life permanent magnet motor.
BTU Cooling
50,000
CFM
75,000
Amps at 13.5V
18
Dimensions
39.25W x 10.75H x 17.5D"
Weight
28 lbs
This model 110 Frisking roof or underbody mounted condenser is a way of providing maximum heat transfer during stop and go operations. Featured are three 11" blades, white aluminum housing and powder coated galvanized mounting brackets.
BTU Cooling
60,000
CFM
42,000
Amps at 13.5V
22.5
Dimensions
41.75W x 6H x 13D"
Weight
33 lbs
This basic kit includes all components need for a complete installation including the above shown evaporator, condenser, compressor,holes and fittings, and electric wiring with relays and switches. Additional equipment and or additions listed at the bottom of the page, may be required depending upon your particular nissan.
SUPLIMENTAL ADD ON's
Long 170" Wheel Base
Add Compressor Brackets
Add for Dual Wheels
Add for 170" WB Standard High Top Van w/Ceiling Mount Evaporator and Mounting Bracket
Add for 170" WB Extended Van High Top w/Ceiling Mount
Evaporator and Mounting Bracket
These ProAir kits are part of the Mercedes-Benz Assurance Program
and Mercedes-Benz Freightliner Approved for rear air conditioning and heating systems.
