Listings
are for most Promasters. You may need additional
equipment for your unit.
Call 800-884-3826 to check.
1100 AC KIT
Tie in W/Mid Switch
The
model 1100 unit was designed
for a small commuter, shuttle type
vehicle requires just a little extra
cooling.
BTU Cooling
15,000
BTU Heating
24,000
CFM
290
Amps at
13.5v
9.5
Dimensions
17.25W x 6D
x 12H"
Weight
9 lbs
This basic
kit includes all components need for a
complete installation including the above
shown evaporator, condenser,
compressor,hoses and fittings, and electric
wiring with relays and switches. Additional
equipment and or additions listed at the
bottom of the page, may be required
depending upon your particular Sprinter.
530/110/435 MAX AC KIT
Additional AC System
The model 530 unit was
designed for a small commuter, shuttle
type vehicle requires an average amount
of extra cooling.It is used with
items that do not require a refrigerated
environment. The unit is powered by twin
dual bearing, three speed motors.
BTU
Cooling
30,000
CFM
480
Amps at
13.5v
21
Dimensions
33.75W x 12D
x 5.5H"
Weight
23.5 lbs
This
model 109 Frisking roof or underbody
mounted condenser is a way of providing
maximum heat transfer during stop and go
operations. Featured are twin 11" blades,
white aluminum housing and powder coated
galvanized mounting brackets.
BTU Cooling
60,000
CFM
4200
Amps at
13.5V
22.5
Dimensions
44.5W x 13D
x 13H"
Weight
33 lbs
BTU Heating
35,000
CFM
300
Amps at
13.5v
4.9
Dimensions
10.5W x 9.5D
x 9.375H"
Weight
8 lbs
Compresor,Hardware,Hozes,Switches
This basic
kit includes all components need for a
complete installation including the above
shown evaporator,condenser,heater,hoses,
fittings, and electric wiring with relays
and switches.
560/110 MAX AC KIT
Additional AC System
The model 560 unit was
designed for a larger commuter, shuttle
type vehicle. It is used with
items that do not require a refrigerated
environment. The unit is powered by twin
dual bearing, three speed motors.
BTU Cooling
30,000
BTU Heating
32,000
CFM
630
Amps at
13.5v
16.3
Dimensions
17.5W x
9.25D x 13H"
Weight
29 lbs
This
model 109 Frisking roof or underbody
mounted condenser is a way of providing
maximum heat transfer during stop and go
operations. Featured are twin 11" blades,
white aluminum housing and powder coated
galvanized mounting brackets.
BTU Cooling
60,000
CFM
4200
Amps at
13.5V
22.5
Dimensions
44.5W x 13D
x 13H"
Weight
33 lbs
Compresor,Hardware,Hozes,Switches
This kit
includes all components need for a complete
installation including the above shown
evaporator, condenser, compressor,hoses and
fittings, and electric wiring with relays
and switches.
941/110 MAX AC KIT
Additional AC System
The
model 941 is a horizontally mounted large
capacity cooling and heating unit that can
be mounted in most cabinets. RV's,
Specialty Vehicles and ambulances are the
primary users.
BTU Cooling
32,000
BTU Heating
35,000
CFM
630
Amps at
13.5v
21
Dimensions
32W x 15.5D
x 8.5H"
Weight
36 lbs
This
model 109 Frisking roof or underbody
mounted condenser is a way of providing
maximum heat transfer during stop and go
operations. Featured are twin 11" blades,
white aluminum housing and powder coated
galvanized mounting brackets.
BTU Cooling
60,000
CFM
4200
Amps at
13.5V
22.5
Dimensions
44.5W x 13D
x 13H"
Weight
33 lbs
Compresor,Hardware,Hozes,Switches
This kit
includes all components need for a complete
installation including the above shown
evaporator, condenser, compressor,hoses and
fittings, and electric wiring with relays
and switches.
941/110 MAX AC KIT
Additional AC System
The
model 941 is a horizontally mounted large
capacity cooling and heating unit that can
be mounted in most cabinets. RV's,
Specialty Vehicles and ambulances are the
primary users.
BTU Cooling
32,000
BTU Heating
35,000
CFM
630
Amps at
13.5v
21
Dimensions
32W x 15.5D
x 8.5H"
Weight
36 lbs
This
model 109 Frisking roof or underbody
mounted condenser is a way of providing
maximum heat transfer during stop and go
operations. Featured are twin 11" blades,
white aluminum housing and powder coated
galvanized mounting brackets.
BTU Cooling
60,000
CFM
4200
Amps at
13.5V
22.5
Dimensions
44.5W x 13D
x 13H"
Weight
33 lbs
Compresor,Hardware,Hozes,Switches
This kit
includes all components need for a complete
installation including the above shown
evaporator, condenser, compressor,hoses and
fittings, and electric wiring with relays
and switches.
