| Our large variety of van and rv bases offer a broad choice of applications and leave your preferences wide open. We have front seat bases for almost all applications in most vehicles. Center seat bases will with high back seats in vans and low back seats in RV's. 6 way power bases will add the maximum comfort with multiple adjustments. Seating systems tested and certified to meet FMVSS 207 safety standards per sections S4.2 and S4.3. Check out our offerings and call or write if you have questions. |
 |
|
| |
| |
6-WAY POWER BASES |
All Motor Homes |
|
|
|
|
|
| |
|
- After market power unit. (does not
directly replace OEM power units)
- 6 Way power. Front up-down, back up-down,
slide back-forth.
- 14" wide bolt pattern (can be re-drilled from
13 1/4 to 14 3/4")
- Multiple front to back bolt patterns.
(Others can be drilled.)
- Requires one hot wire to fuse panel.
- Weight 24 lbs.
|
|
|
|
 |
|
|
| |
| |
|
|
|
| |
|
|
|
|
|
|
|
ALL CLASS A |
Power Swivel Stack |
|
|
- Complete bolt in package with riser,swivel plate and double seat belt bar.
- Height front:10.75-12.25"
- Height rear:9.25-10.75"
- Top bolt pattern 14w x 7.5, 9.5, 10.25, 11, 12, 13, 14.5"
- Bottom bolts 8w x 8" and 8w x 10"
|
|
|
|
|
|
|
|
|
71-95 GM CLASS B,C |
Power Stack After Market Seat |
|
|
- Complete bolt in package with riser and double seat belt bar.
- Requires a ground wire attachment and 12-V power from the fuse panel.
|
|
|
|
|
|
|
|
|
96+ GM CLASS B,C |
Power Stack After Market Seat |
|
|
- Complete bolt in package with riser and double seat belt bar.
- Requires a ground wire attachment and 12-V power from the fuse panel.
|
|
|
|
|
|
|
|
|
|
96+ GM CLASS B,C |
Power Swivel Stack After Market Seat |
|
|
- Complete bolt in package with riser and double seat belt bar.
- Includes 360 degree swivel plate
- Requires a ground wire attachment and 12-V power from the fuse panel.
|
|
|
|
|
|
|
|
|
|
94+ DODGE CLASS B,C |
Power Stack After Market Seat |
|
|
- Complete bolt in package with riser and double seat belt bar.
- Requires a ground wire attachment and 12-V power from the fuse panel.
|
|
|
|
|
|
|
|
|
|
94+ DODGE CLASS B,C |
Power Swivel Stack After Market Seat |
|
|
- Complete bolt in package with riser and double seat belt bar.
- Includes 360 degree swivel plate
- Requires a ground wire attachment and 12-V power from the fuse panel.
|
|
|
|
|
|
|
|
|
|
75-91 FORD CLASS B,C |
Power Stack After Market Seat |
|
|
- Complete bolt in package
- Top bolt pattern 14 x 11"
- Requires a ground wire attachment and 12-V power
from the fuse panel.
|
|
|
|
|
|
|
|
|
75-91 FORD CLASS B,C |
Power Swivel Stack After Market Seat |
|
|
- Complete bolt in package
- Top bolt pattern 14 x 11"
- Includes 360 degree swivel plate
- Requires a ground wire attachment and 12-V power
from the fuse panel.
|
|
|
|
|
|
|
|
|
92-95 FORD CLASS B,C |
Power Stack After Market Seat |
|
|
- Complete bolt in package
- Top bolt pattern 14 x 11"
- Requires a ground wire attachment and 12-V power from the fuse panel.
|
|
|
|
|
|
|
|
|
92-95 FORD CLASS B,C |
Power Swivel Stack After Market Seat |
|
|
- Complete bolt in package
- Leaves stock manual slides with piro attachment in place.
- Top bolt pattern width will need to be expanded from 14" to 14 1/4" on power unit for stock slides.
- Includes 360 degree swivel plate
- Requires a ground wire attachment and 12-V power from the fuse panel.
|
|
|
|
|
|
|
|
|
96+ FORD CLASS B,C |
Power Stack-Factory Seat |
|
|
- Complete bolt in package
- Leaves stock manual slides with piro attachment in place.
- Top bolt pattern width will need to be expanded from 14" to 14 1/4" on power unit for stock slides.
- Requires a ground wire attachment and 12-V power
from the fuse panel.
|
|
|
|
|
|
|
|
|
96+ FORD CLASS B,C |
Power Swivel Stack-Factory Seat |
|
|
- Complete bolt in package
- Leaves stock manual slides with piro attachment in place.
- Top bolt pattern width will need to be expanded from 14" to 14 1/4" on power unit for stock slides.
- Includes 360 degree swivel plate
- Requires a ground wire attachment and 12-V power from the fuse panel.
|
|
|
|
|
|
|
|
|
96+ FORD CLASS B,C |
Power Stack-After Market Seat |
|
|
- Complete bolt in package
- Includes piro bracket for seat belt reattachment.
- Requires a ground wire attachment and 12-V power from the fuse panel.
|
|
|
|
|
|
|
|
| |
|
96+ FORD CLASS B,C |
Power Swivel Stack-After Market Seat |
|
|
- Complete bolt in package
- Includes piro bracket for seat belt reattachment.
- Includes 360 degree swivel plate
- Requires a ground wire attachment and 12-V power from the fuse panel.
|
|
|
|
|
|
|
|
|
|
CLASS A SWIVEL RISER |
RV Seat Bases |
|
|
- Swivel and Riser
for power base all in one.
- Set in an upward angle towards the front with a 5 1/2" center height.
- Top bolt pattern is a match to power unit.
- Bottom bolt patterns 8x8" and
6 1/4 x 9 1/4"
|
|
|
| |
|
|
|
|
| |
71-95 GM |
Power Base Riser |
|
|
- Raises power unit to retain original seat height.
- Universal bottom to allow base offset
|
|
|
|
|
|
|
|
| |
|
|
- Raises power unit to retain original seat height.
- Universal bottom to allow base offset
- Not available for 2007+ GM class B or C chassis driver position due to electronic module under seat.
|
|
|
|
|
|
|
|
| |
94+ DODGE |
Power Base Riser |
|
|
- Raises power unit to retain original seat height.
- Universal bottom to allow base offset
|
|
|
|
|
|
|
|
| |
| |
75-91 FORD |
Standard Power Base Riser |
|
|
- Raises power unit to retain original seat height.
- Bottom bolt pattern is an exact match up to Ford factory floor bolt pattern.
- 3" front height
- 1.5" rear height.
|
|
|
|
|
|
|
|
| |
| |
92+ FORD |
Standard Power Base Riser |
|
|
- Raises power unit to retain original seat height.
- Bottom bolt pattern is an exact match up to Ford factory floor bolt pattern.
- 5 1/2" front height
- 3" rear height.
|
|
|
|
|
|
|
|
| |
92+ FORD |
Low Profile Power Base Riser |
|
|
- Used with swivel plate and power
unit to retain original seat height.
- Bottom bolt pattern is an exact match up to Ford factory floor bolt pattern.
- 4" front height
- 1 1/2" rear height
|
|
|
|
|
|
|
|
96+ FORD PIRO ADAPTER |
Replacement Bracket |
|
|
|
- Required for aftermarket seats in Class C and B motorhomes.
- Re-attaches existing seat belt and air bag activator
- Simple one bolt seat belt
re-attachment.
|
|
|
|
|
|
|
|
|
| |
UNIVERSAL |
RV Seat Riser-Bases |
|
|
- 16 x 16" top plate size
- Not predrilled
- Multiple applications
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
|
|
|
|
|
| |
UNIVERSAL SWIVEL PLATE |
Multiple Applications |
|
|
- 15 x 15" overall size
- Top and bottom bolt patterns(w x L)
13 x 14", 14 x 11", 14 x 11 1/2"
- 1 3/8" high.
- Requires additional reinforcements to bring up to DOT safety standards.
|
|
|
| |
|
|
|
|
| |
SWIVEL PLATE |
RV After Market Seat |
|
|
- 15 x 15" overall size
- Top bolt pattern 8 x 11"
- 1 1/2" high.
- Bolts to top of power base
- 2" offset to center of van.
|
|
|
|
|
|
|
|
|
| |
SWIVEL PLATE |
Custom Bolt Pattern - Top |
|
|
- 15 x 15" overall size
- Top bolt pattern Custom
- Bolts to top of power base
- 1 1/2" high.
- Not returnable if made to
customer specified set-up.
|
|
|
|
|
|
| |
BOLT IN KIT |
Universal Hardware |
|
|
- 4 - 1/2"x1 1/2" bolts
- 4 - 2" x 5" under floor
reinforcement plates
- Multiple applications
|
|
|
|
|
|
|
Our large variety of van and rv bases offer a broad choice of applications and leave your preferences wide open. We have front seat bases for almost all applications in most vehicles. Center seat bases will with high back seats in vans and low back seats in RV's. 6 way power bases will add the maximum comfort with multiple adjustments. Seating systems tested and certified to meet FMVSS 207 safety standards per sections S4.2 and S4.3. Check out our offerings and call or write if you have questions.
|
