These are the most common sizes and equipment used in Chevy-Dodge-Ford
vans, Check your mesurements against the ones listed in micellaneous applicatins. Your base hight will be determined by an overall height required less 8 inches.(the thickness of the seat cushion).Slides add 1 inch. Check if the distace between the arms is at least 16 inches or less.
Click for Larger Image
16 Inch Wide
Required measurements to order.
Distance between seat cushions.
Distance between seat arms.
Distance from the high point in the floor (not from the inside of an existing console) to the top of the seat cushion at the center.
*Note: 92+ Ford vans may have restricted space if van is equiped with large glove box style engine console.
Add a console with a seat option for storage, cup holders and an ocational extra passenger.
You will need to measure between the seat cushions and seat arms to determine the size for your van
This Van Seat Features:
Designed to mount between seats
Heavy duty tubular
Available in 16 inch width.
Back locks in upright position
Storage in console and under seat
All materials meet or exceed FMVSS #302 safety standards
1 Year van seats warranty
Shipped Via Fed-X
Van Console Seats
Seat Base - Required for Installation
This base will raise the console seat to the same level as the bucket seats. You will need the height measurement from the highest part between the bucket seats to center of the seat cushion.
74" Lap Belt
Attached with the rear bolts of the base between floor and the base.
Seat Slide Set
Forward and back adjustment.
Bolt and Under Floor Reinforcement Kit Bolts and under floor reinforcement plates for a secure mount.